风口生产厂家逸捷主营:浙江防火阀加工,风口厂家批发,防火阀厂家直销,防火阀厂家,多叶送风口价格,混流风机生产厂家等!

咨询热线:

0571-85460486

行业新闻
当前位置:网站首页 > 新闻中心 > 行业新闻
  • 铝合金风口的配件该怎样选择呢
  • 本站编辑:杭州逸捷暖通设备有限公司发布日期:2022-06-21 11:51 浏览次数:

    铝合金风口的配件该怎样选择呢。

    1、有必要确保铝合金风口与箱体联接的缝隙密封出色。

    2、设备多台并联的表面冷却器和加热器时,除将箱体之间联接缝隙密封外,还应将表面冷却器或加热器之间的缝隙进行密封。

    3、铝合金风口表面冷却器和加热器的翅片一般用薄铝板制造,简略在设备中大面积的碰歪叠压,使经加热器的空气无法经过,增大体系的阻力和下降冷却或加热面积.因此在吊装和组装过程中应加以保护.关于已碰歪的翅片有必要进行扳正调整。

    铝合金风口是活动叶片是夹层式,夹层间镶嵌有消声材料。铝合金风口可组装成大规模的百叶窗全体以抵达较大的空气流量和较好的消声特性。且铝合金风口二次氧化镀膜全铝合金结构,用不锈钢板、镀锌钢板材料防雨、防火运用于任何气候条件。

    铝合金风口能够较大极限地减少气流传递阻力和削弱噪声按模数组装成系列铝合金风口标准大小的消声百叶根据需要在消声百叶外喷涂各种色彩的镀膜。因为铝合金风口结构的材料全部选用优质铝合金,加之特别的加工工艺,使得本消声百叶窗能够在任何气候条件下运用,底边框和百叶片的变形。

    铝合金风口作业时运用出风的旋转,将空气以螺旋状送出,发作恰当高的诱导比,使送风与周围室内空气活络混合。与传统的散流器不同,铝合金风口的出风槽呈径向摆放,风道中的送风经铝合金风口出风槽的导向,构成沿切线方向的射流,整个铝合金风口的送风在多股射流的效果下,发作一团如飓风状的涡流.涡流的中心区域构成一个负压区,诱导周围室内空气活络地与送风混合,整个送风气流呈安稳的水平涣散流态。它的诱导比是常规散流器的1O ~20倍。

How should the fittings of aluminium alloy tuyere choose?

1. It is necessary to ensure that the gap sealing of aluminum alloy tuyere and box body is excellent.

2. When the equipment has multiple parallel surface coolers and heaters, in addition to sealing the joint gap between the box body, the gap between the surface cooler or heater should also be sealed.

3. The fins of the surface cooler and heater of aluminum alloy tuyere are generally made of thin aluminum plate, which is briefly touched and stacked in a large area in the equipment, so that the air through the heater can not pass through, and increase the resistance of the system and reduce the cooling or heating area. Therefore, it should be protected in the process of lifting and assembly. It is necessary to adjust the fins that have been touched crooked.

Aluminum alloy tuyere is a sandwich blade, interlayer embedded with silencer materials. Aluminum alloy tuyere can be assembled into large-scale shutters to achieve greater air flow and better noise reduction characteristics. And aluminum alloy tuyere secondary oxidation coating full aluminum alloy structure, with stainless steel plate, galvanized steel plate material rain, fire protection applied in any climate conditions.

Aluminum alloy tuyere can greatly reduce airflow transmission resistance and reduce noise according to the module assembled into a series of aluminum alloy tuyere standard size muffler louvers according to the needs of the muffler louvers coated with various colors. Because the material of aluminum alloy tuyere structure is all selected high quality aluminum alloy, together with special processing technology, so that the muffled louver can be used in any climate conditions, the deformation of bottom frame and 100 blades.

Aluminum alloy tuyere operation using the rotation of the wind, the air is sent out in a spiral shape, the onset of appropriate high induction ratio, so that the air supply and the surrounding indoor air active mixing. Different from the traditional diffuser, the air outlet groove of aluminum alloy tuyere is placed in radial direction, and the air supply in the air channel is guided by the air outlet groove of aluminum alloy tuyere, forming a jet along the tangential direction. The air supply of the whole aluminum alloy tuyere is in the effect of multi-jet, and a cluster of hurricane-like vortex occurs. The central area of the vortex forms a negative pressure area, which induces the surrounding indoor air to mix with the supply air actively, and the whole supply air flow shows a stable horizontal slack flow state. Its induction ratio is 10 ~20 times that of the conventional diffusible device.